Ross Synergy 100 MD, Руководство оператора

Страница: 228 / 402

12–18 • Squeeze & Tease MD Basic Operation Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Channel Listing
There are specific naming conventions for the Channel Listing on the Squeeze & Tease MD menus.
These conventions apply to how the different channels are referred to on the control panel. Beside the
menu title is a
Channel Listing that displays the status of the channels in the active Keyer.
Position/Crop Menu — Channel Listing
The Channel Listing is displayed on each Squeeze & Tease menu to indicate how many channels, or
objects, are active or assigned, and which Keyer you are currently working in.
Channel Status
The status of the channels and objects is indicated by the appearance of the items in the Channel
Listing , representing the number of channels or objects that are available, or assigned, to the select
Key. For example, if you assign two channels to a Key, the 1 and 2 will appear as assigned or active,
representing the first and second channel that is assigned to the Key. If you remove the first channel
from the Key (
1 ), the remaining channel ( 2 ) will become the first channel ( 1 ) in the Key.
Channel status is shown as follows:
• Active — Active channels will appear Green . These are the channels that you are
manipulating.
• Assigned — Assigned channels will appear White . These are the channels that have
been assigned to the Key, but are not currently being manipulated.
Note
Channel information is shown for the Active Keyer only. If you are in
Key 1, only the active or assigned, channels for Key 1 are displayed.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Position/Crop 1 2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
Off
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
1 2 Key 1
Active Keyer Channels
1
1