Ross Synergy 100 MD, Руководство оператора

Страница: 254 / 402

14–4 • Advanced Positioning Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Viewpoint
The Viewpoint feature allows you to change the perspective, or point-of-view, of the channel on the
screen. This feature can be used to create an effect where the channel appears to have a different
vanishing point on the screen. Refer to the section “
Viewpoint and Perspective ” on page 12–6 for
more information on viewpoint.
Use the following procedure to change the perspective of a channel:
1. Navigate to the Adv. Positioning Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
• Press 9. Advanced Positioning to display the Adv. Positioning Menu .
2. Press 1. Viewpoint to display the Viewpoint Menu .
Adv. Positioning — Viewpoint Menu
3. Adjust the viewpoint as follows:
• X-Location — Use the HUE knob, or move the Positioner left and right , to move
the viewpoint left or right along the X-Axis .
• Y-Location — Use the SAT knob, or move the Positioner up and down , to move
the viewpoint up or down along the Y-Axis .
This completes the procedure for changing the perspective of a channel.
Operating
Tip
You can use the
POSN
hotkey to navigate to the Position/Crop Menu
and then press
9. Adv. Positioning
to display the Adv. Positioning
Menu .
Note
Viewpoint cannot be used with objects. You must set the viewpoint for
each channel before you create the object.
Use positioner or Hue, Sat, Lum to modify
Adv. Positioning 1 2 U O1 O2 Key 1
0. Spin
1. Viewpoint
2. Locate
3. Reserved
4. Reserved
Viewpoint X: 0.000
Y: 0.000