Ross Synergy 100 MD, Руководство оператора

Страница: 202 / 402

11–20 • Global-Store Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
• Move the positioner
Up
or
Down
to select the
Shaped/Unshaped
mode you
want to use. You can select between the following:
~
Shaped
— Select this option to have the switcher perform an additive Key.
With Shaped Keys, the Key Alpha cuts a hole based on the monochrome value
of the alpha. Shades of gray are translated into either white or black, giving the
Key a hard edge.
~
Unshaped
— Select this option to have the switcher perform a multiplicative
Key. With an unshaped Key, the Key Alpha cuts a hole based on the gradient
values of the alpha. Shades of gray are translated into transparency levels,
giving the Key a soft edge. Unshaped Key alphas can also be considered true
linear alphas.
9. Adjust the Display Mode of the still as follows:
• Press
2. Display Mode
.
Global-Store — Display Mode Menu
• Move the positioner Left or Right to select the Field/Frame display mode you
want to use. You can select between the following:
~ Frame — Select this option to have the entire frame of the still image
displayed.
~ Field1 — Select this option to have field 1 of the still image displayed.
~ Field2 — Select this option to have field 2 of the still image displayed.
~ Swap — Select this option to have field 1 and field 2 of the image swapped
when they are displayed.
10. Set the Animation characteristics of an animation as follows:
• Press 4. Animation .
Note Select Unshaped if you are unsure about which mode to use.
Unshaped allows the switcher to match the alpha and fill signals that
the source device is generating.
Note If you are operating in a progressive scan video format, the Field1 and
Field2 options are not available.
MENU
Exit
On Air Properties
0. Position
1. Shaped
2. Display Mode
3. Reserved
4. Animation
Field/Frame: Frame
5. Store Properties as Default
Use Positioner or HUE, SAT, LUM to modify