Ross Synergy 100 MD, Руководство оператора

Страница: 22 / 402

1–4 • Introduction Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Documentation Conventions
The following conventions are used throughout this manual:
• Rear panel connectors are indicated in bold-faced upper case letters. For example:
The AUX 1 connector is…
• Control Panel buttons are indicated in bold-faced upper case letters, using a sans-serif
font. For example:
Press WIPE to…
• Menu names on the preview overlay and switcher control panel areas are indicated in
bold-faced text. For example:
The Inputs Menu allows you to …
The Downstream Keyer Group consists of …
• The “ Operating Tips ” table and “ Note ” table are used throughout this manual to
provide customers with additional useful information. For example:
• Asterisks (*) in Synergy 100 MD menu trees denote levels of association. For example,
all items marked with two asterisks (**) are grouped together, all items marked with
three asterisks (***) are grouped together, and so on.
Operating
Tip
As you switch between Key 1, Key 2, and the DSKs, the crosspoint
buttons will indicate which sources are selected for that key. If you
change a source, this will not affect the other selections.
Note
Fade to Black only affects the program output of the switcher. Aux Bus
outputs or Clean Feed outputs will not be affected by Fade to Black.