Ross Synergy 100 MD, Руководство оператора

Страница: 313 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–37
Recalling Sequences and Squeeze & Tease Wipes
Use the following procedure to recall sequences and Squeeze & Tease Wipes from the switcher hard
drive or a USB Drive. Both sequences and Squeeze & Tease Wipes are stored as sequences in the
system. Sequence registers are in the file
ST3DSEQ.TZA .
You can recall the entire set of registers or you can recall individual sequences and wipes, as desired.
Recalling an Entire Set of Sequences
Use the following procedure to recall an entire set of sequences:
1. If you are using a USB Drive, plug it into the USB port on the front of the switcher. Wait
at least 5 seconds to allow the system to recognize the USB Drive.
2. Navigate to the Dest/Source Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
5. Disk
to display the Disk Menu .
• Press
0. Dest/Source
to display the Dest/Source Menu .
Dest/Source Menu
3. Select the storage device you want to recall your set of sequences from as follows:
• Press
0. Dest/Source
.
• Use the
ª
and
©
buttons to select the storage device you want to use. You can
select between the following:
~
Hard Drive
— This option will allow you to recall the files on the internal
hard drive.
~
USB
— This option will allow you to recall the files from a USB Drive. You
must wait 5 seconds after inserting the USB Drive into the USB Port before
you can recall files. Refer to the section “
Notes on Using a USB Drive ” on
page 9–16 for further information.
Important
If you are going to recall the entire set of sequence registers, ensure
that your
current on-line set of sequence registers is stored on the
switcher hard drive or a USB Drive. If you have not stored them, they
will be overwritten when you recall a new file.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Dest/Source
0. Dest/Source
1. Set Names Hard Drive
SETUP(00)