Ross Synergy 100 MD, Руководство оператора

Страница: 274 / 402

16–6 • Preprocessor Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Colorize Effect
The Colorize Effect allows you to replace the color component of the channel image with a color of
your choice. The levels of hue and saturation are indicated. The default color is gray.
Use the following procedure to apply the Colorize Effect to a channel image:
1. Navigate to the Preprocessor Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 3. Preprocessor to display the Preprocessor Menu .
2. Press 3. Colorize to display the Colorize Menu .
Preprocessor — Colorize Menu
3. Apply a color effect as follows:
• Hue — Use the HUE knob, or move the Positioner left and right , to adjust the
color.
•
Saturation
— Use the
SAT
knob, or move the Positioner up and down , to adjust
the saturation of the color.
~
Monochrome or no saturation — set the value to
0%
.
~ Full color saturation — set the value to
100%
.
This completes the procedure for applying the Colorize Effect to a channel image.
Operating
Tip
You can use the PREPROC hotkey to display the Preprocessor
Menu directly.
Note If the effect is not On (not yet in use), you must press 3. Colorize
again, to toggle to effect On .
Use positioner or Hue, Sat, Lum to modify
Preprocessor 1 2 U O1 O2 Key 1
0. Defocus
1. Mosaic
2. Posterize
3. Colorize
4. Strobe
Colorize Hue: 0.0%
Saturation: 0.0%
Off
Off
Off
On
Off