Ross Synergy 100 MD, Руководство оператора

Страница: 328 / 402

19–4
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
If the WARP effect you are trying to apply requires two WARP resources, the following pop-up
message displays:
You must free resources manually in order to create your dual layer WARP effect.
Freeing WARP resources has different effects depending on what the resource is being used for. If the
WARP resource is being used as part of a sequence, the sequence is unloaded when the WARP
resource is freed. If the resource is being used as a wipe transition, the transition is switched to a
dissolve when the WARP resources is freed.
Once sufficient WARP resources are freed, the new WARP effect is retried unless it is being initiated
as a result of one of the following:
• Memory Register Recall
• Key Copy or Swap
In these cases, the action proceeds without the associated WARP effect applied.
There are not enough channels available to perform a Dual Layer WARP.