Ross Synergy 100 MD, Руководство оператора

Страница: 87 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Transitions • 5–7
9. Press the AUTO TRANS button to perform a transition. Notice that both ON AIR
indicators will be lit as the switcher transitions Key 1 and Key 2 .
The resulting transition will take Key 1 off-air, Key 2 on-air, and perform a flip-flop of
the PGM / PST buses. Notice that although we transitioned both keys, because Key 1
was on-air and Key 2 was off-air, the transition took Key 1 off-air and Key 2 on-air.
This completes the example transitions exercise. During this example we learned that you can perform
different automatic or manual transitions on multiple sources. We also learned that a transition of
multiple keys can produce different results, depending on whether the keys were on-air or not. Refer
to the section “
Introduction to Keying ” on page 7–2 for more information on using keys.
Operating
Tip
The preview monitor output will show you the next scene. For
example, if a key is currently
on-air and the desired key button is lit,
the preview monitor will show the key off .
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L