Ross Synergy 100 MD, Руководство оператора

Страница: 329 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–5
WARP Effects
This section describes each WARP effect available for use. Each effect has specific settings which you
can modify to change the appearance of the effect. Experiment with different settings to see how they
affect the appearance of each WARP effect.
For each WARP presented here:
• Use the Pattern Buttons in the Effects Control Group to access each menu item.
• Use the Mattes Color knobs to adjust WARP parameters
Film
This WARP has the following parameters that can be adjusted:
•
Film
— This parameter selects from a variety of film presets, add noises, and modify
the resolution of the effect.
•
Defects
— This parameter adjusts the type and number of defects to the effect.
•
Light
— This parameter adjusts the lighting of the effect.
•
Color
— This parameter adjusts the color of the effect.
•
Sensitivity
— This parameter adjusts the color and luminance of the effect.
WARP Menu — Film
Important
When working with Squeeze & Tease WARP effects, keep in mind that
the parameters are applied based on the whole screen area (as if the
image were full screen). If your key is not at full screen, the WARP
effect may not appear as expected or desired.
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Active Warp: Film