Rosemount 5300 Series, Справочное руководство

Страница: 303 / 432

289
Product Certifications
Product Certifications
May 2016
Reference Manual
00809-0100-4530, Rev DD
B.4.4 Brazilian certifications
INMETRO approvals
Special Conditions for Safe Use (X):
Letter X in the number of the certificate indicates the
following special condition(s) for safe use:

For models 530xFxxxxxxxxxE1..., 530xFxxxxxxxxxKA...,
530xFxxxxxxxxxKB... or 530xFxxxxxxxxxKC... and when
the sensor area requires an EPL Ga, the installation of the
transmitter on the process wall must be done in a way
that ensures the minimum degree of protection IP67 in
the connection, in compliance with regulation ABNT NBR
IEC 60529.

The intrinsically safe circuit did not withstand the
dielectric rigidity tests with 500 Vca as specified in clause
6.4.12 of regulation IEC 60079-11.

Probes covered with plastic or plastic discs should have a
non-conductive area not exceeding the maximum
permitted area for the MC group, which is 4 cm
2
.
Therefore, when an antenna is used in a potentially
explosive atmosphere, appropriate measures should be
taken by the user to prevent electrostatic discharge.

This equipment contains light metals. The equipment
must be installed in a way that the risk of impact or
friction with other metal surfaces is eliminated.

The Ex ia version of the field device of model FISCO 5300
can be provided with a FISCO [Ex ib] power supply when
the power supply is certified with three current limiter
safety devices separately and with limitation of voltage,
complying with the requirements of the Ex ia model.
Certificate: NCC 14.2258X
Standards:
ABNT NBR IEC: 60079-0:2013, 60079-1:2009,
60079-11:2013, 60079-26:2008, 60079-31:2011
E2 Flameproof:
4-20 mA/HART model:
Ex d ia IIC T4 Gb/Ga
Ex ta IIIC T79 °C
-40 °C < T
a
< +70 °C
U
m
: 250 V
F
OUNDATION
Fieldbus model:
Ex d ia IIC T4 Gb/Ga
Ex ta IIIC T69 °C
-40 °C < T
a
< +60 °C
U
m
: 250 V
Modbus model:
Ex d ia IIC T4 Gb/Ga
Ex ta IIIC T79 °C
-40 °C < T
a
< +70 °C
U
m
: 250 V
I2 Intrinsically safe:
4-20 mA/HART model:
Ex ia IIC T4 Ga
Ex ta IIIC T79 °C
-50 °C < T
a
< +70 °C
U
i
= 30 V, I
i
= 130 mA, P
i
= 1.0 W, L
i
= 0
μ
H, C
i
= 7.26 nF
F
OUNDATION
Fieldbus model:
Ex ia IIC T4 Ga
Ex ta IIIC T69 °C
-50 °C < T
a
< +60 °C
U
i
= 30 V, I
i
= 300 mA, P
i
= 1.5 W, L
i
= 0
μ
H, C
i
= 4.95 nF
Installation drawing: 9240030-938
IB FISCO model:
FISCO Field Device
Ex ia IIC T4 Ga
Ex ia/ib IIC T4 Ga/Gb
Ex ta IIIC T69 °C
-50 °C < T
a
< +60 °C
U
i
= 17.5 Vdc, I
i
= 380 mA, P
i
= 5.32 W, L
i
< 1
μ
H, C
i
=
4.95 nF
Installation drawing: 9240 030-938
B.4.5 Chinese certifications
National Supervision and Inspection Center for
Explosion Protection and Safety of Instrumentation
(NEPSI) approvals
Special Conditions for Safe Use (X):
Refer to Certificates GYJ 111230X and GYJ 13.1387.
E3 Flameproof:
4-20 mA/HART model:
Ex d ia IIC T4 (- 40 °C < T
a
< + 70 °C) DIP A20 T
A
79 °C
F
OUNDATION
Fieldbus model:
Ex d ia IIC T4 (- 40 °C < T
a
< + 60 °C) DIP A20 T
A
69 °C
Approval valid for HART, F
OUNDATION
Fieldbus, and
Modbus options.
I3 Intrinsically safe:
4-20 mA/HART model:
Ex ia IIC T4 (- 50 °C < T
a
< + 70 °C) DIP A20 T
A
79 °C
U
i
= 30 V, I
i
= 130 mA, P
i
= 1.0 W, C
i
= 7.26 nF, Li =

0

H
F
OUNDATION
Fieldbus model:
Ex ia IIC T4 (- 50 °C < T
a
< + 60 °C) DIP A20 T
A
69 °C
U
i
= 30 V, I
i
= 300 mA, P
i
= 1.5 W, C
i
= 4.95 nF, Li =

0

H
Approval valid for HART and F
OUNDATION
Fieldbus
options.