96 • Chapter 5: User Mode
GX-6000 Operator’s Manual
5 . Use
▲
AIR and SHIFT
▼
(PANIC) to move the cursor next to the desired
configuration for the selected channel. In the example below, the cursor has been
moved next to the
H2S (H2S )
selection.
6 . Press and release POWER/ENTER to select the channel configuration.
NOTE:
Each channel must have a gas assignment. If you change one channel’s gas to
something else, the two affected channels will end up swapping places. In the
example above, when you select H
2
S as channel 1’s new gas, CH
4
, which used
to be channel 1, would automatically be assigned to channel 3, H
2
S’ old
channel.
7 . Repeat Step 5 and Step 6 for any other channels you want to configure.
8 . Use SHIFT
▼
(PANIC) to move the cursor next to the
ESCAPE
menu item.
NOTE:
If you want to exit to the main menu without saving any channel configuration
changes, press and release DISP/LOCK.
9 . Press and release POWER/ENTER to save the changes and return to the main menu.
USER
CHANNEL 1
CH4 (HC )
O2 (OX )
H2S (H2S )
CO (CO )
VOC (SM1)
ESCAPE