Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 472 / 648

Chapter 8: Using the Command Line Interface
453
Setting the Z Coordinate
This command specifies the Z coordinate of an environmental sensor.
config:# externalsensor <n> zlabel "<coordinate>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer between 1 and 32.

Depending on the Z coordinate format you set, there are two types of
values for the <coordinate> variable:
Type Description
Free form <coordinate> is a string comprising up to 24
ASCII printable characters, and it must be
enclosed in quotes.
Rack units <coordinate> is an integer number in rack units.
Note: To specify the Z coordinate using the rack units, see Setting the Z
Coordinate Format for Environmental Sensors (on page 378).
Changing the Sensor Description
This command provides a description for a specific environmental
sensor.
config:# externalsensor <n> description "<description>"
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer between 1 and 32.

<description> is a string comprising up to 64 ASCII printable
characters, and it must be enclosed in quotes.