Raritan PX2-1000 SERIES, Руководство пользователя, Страница: 45 / 648

Chapter 3: Installation and Configuration
26
To set Use this command
IP address
returned by
the DNS
server
network ip
dnsResolverPreference
<resolver>
<resolver> =
preferV4
or
preferV6
e. After enabling the IPv4 or IPv6 protocol in the earlier step,
configure the IPv4 or IPv6 network parameters.
To set Use this command
IPv4
configuration
method
network ipv4
ipConfigurationMode <mode>
<mode> =
dhcp
(default) or
static
IPv6
configuration
method
network ipv6
ipConfigurationMode <mode>
<mode> =
automatic
(default) or
static
 Configure the preferred host name for the IPv4 DHCP or IPv6
automatic configuration.
Note: The <version> variable in all of the following commands is
either
ipv4
or
ipv6
, depending on the type of the IP protocol you have
enabled.
To set Use this command
Preferred host
name
(optional)
network <version>
preferredHostName <name>
<name> = preferred host name
Tip: To override the DHCP-assigned DNS servers with those you
specify manually, type this command:
network <version> overrideDNS <option>
where <option> is
enable
or
disable
. See the table below for the
commands for manually specifying DNS servers.