Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 427 / 648

Chapter 8: Using the Command Line Interface
408
Security Configuration Commands
A security configuration command begins with
security
.
Firewall Control
You can manage firewall control features through the CLI. The firewall
control lets you set up rules that permit or disallow access to the PX
device from a specific or a range of IP addresses.

An IPv4 firewall configuration command begins with
security
ipAccessControl ipv4
.

An IPv6 firewall configuration command begins with
security
ipAccessControl ipv6
.
Modifying Firewall Control Parameters
There are different commands for modifying firewall control parameters.

IPv4 commands
Enable or disable the IPv4 firewall control feature:
config:# security ipAccessControl ipv4 enabled <option>
Determine the default IPv4 firewall control policy for inbound
traffic:
config:# security ipAccessControl ipv4 defaultPolicyIn <policy>
Determine the default IPv4 firewall control policy for outbound
traffic:
config:# security ipAccessControl ipv4 defaultPolicyOut <policy>

IPv6 commands
Enable or disable the IPv6 firewall control feature:
config:# security ipAccessControl ipv6 enabled <option>
Determine the default IPv6 firewall control policy for inbound
traffic: