Raritan PX2-1000 SERIES, Руководство пользователя, Страница: 34 / 648

Chapter 3: Installation and Configuration
15
Note: If necessary, contact Raritan Technical Support for the
maximum operating temperature for your model. See
Maximum
Ambient Operating Temperature (on page 497).
2. Allow sufficient space around the PX device for cabling and outlet
connections.
3. Review
Safety Instructions
(on page iii) listed in this User Guide.
Checking the Branch Circuit Rating
The rating of the branch circuit supplying power to the PDU shall be in
accordance with national and local electrical codes.
Filling Out the Equipment Setup Worksheet
An Equipment Setup Worksheet is provided in this User Guide. See
Equipment Setup Worksheet
(on page 499). Use this worksheet to
record the model, serial number, and use of each IT device connected to
the PDU.
As you add and remove devices, keep the worksheet up-to-date.
Installing Cable Retention Clips on the Inlet (Optional)
If your PX device is designed to use a cable retention clip, install the clip
before connecting a power cord. A cable retention clip prevents the
connected power cord from coming loose or falling off.
The use of cable retention clips is highly recommended for regions with
high seismic activities, and environments where shocks and vibrations
are expected.
To install and use a cable retention clip on the inlet:
1. Locate two tiny holes adjacent to the inlet.
2. Install the cable retention clip by inserting two ends of the clip into
the tiny holes.