Raritan PX2-1000 SERIES, Руководство пользователя, Страница: 393 / 648

Chapter 8: Using the Command Line Interface
374
config:# pdu outletSequenceDelay <outlet1>:<delay1>;<outlet2>:<delay2>;
<outlet3>:<delay3>;...
Separate outlet numbers and their delay settings with a colon. Outlets
followed by delays are separated with a semicolon.
Variables:

<outlet1>, <outlet2>, <outlet3> and the like are individual outlet
numbers or a range of outlets using a dash. For example,
3-8
represents outlets 3 to 8.

<delay1>, <delay2>, <delay3> and the like are the delay time in
seconds.
Setting the PDU-Defined Default Outlet State
This section applies to outlet-switching capable models only.
This command determines the initial power condition of all outlets after
powering up the PDU.
config:# pdu outletStateOnDeviceStartup <option>
Variables:

<option> is one of the options:
off
,
on
or
lastKnownState
.
Option Description
off Switches OFF all outlets when the PX device
powers up.
on Switches ON all outlets when the PX device
powers up.
lastKnownState Restores all outlets to the previous status before
powering down the PX device when the PDU
powers up again.