Raritan PX2-1000 SERIES, Руководство пользователя, Страница: 481 / 648

Chapter 8: Using the Command Line Interface
462
config:# sensor ocp <n> <sensor type> assertionTimeout <as_value>
Variables:

<n> is the number of the overcurrent protector that you want to
configure.

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
Note: If the requested sensor type is not supported, the "Sensor is
not available" message is displayed.

<option> is one of the options:
enable
,
disable
or a numeric value.
Option Description
enable Enables the specified threshold for the
overcurrent protector sensor.
disable Disables the specified threshold for the
overcurrent protector sensor.
A numeric
value Sets a value for the specified threshold of the
overcurrent protector sensor and enables this
threshold at the same time.

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified overcurrent protector sensor. See
"To De-assert" and
Deassertion Hysteresis
(on page 597).

<as_value> is a number in samples that is assigned to the assertion
timeout for the specified overcurrent protector sensor. See
"To
Assert" and Assertion Timeout
(on page 595).
Commands for Environmental Sensors
A sensor threshold configuration command for environmental sensors
begins with
sensor externalsensor
.
You can configure various environmental sensor threshold settings at a
time by combining multiple commands. See
Multi-Command Syntax
(on page 482).
Set the Upper Critical threshold for an environmental sensor: