PrimeLab 1.0 MULTITEST, Руководство пользователя

Страница: 195 / 353

162 162
Continued...
Note(s)
-> (*) Conversion of the measurement result to NO .
3
-> Make sure that the sample contains no air bubbles in the measurement.
If this is the case, remove the air bubbles by tapping it with the cuvette.
-> Extend the listed measurement range to 0 - 110 mg/l (N)
by taking 1 ml of sample water plus 9 ml of distilled water.
The test result displayed on the screen needs to be multiplied by 10.
-> Best results are achieved between 0 – 6 mg/l (N) / 0 – 25 mg/l (NO ).
3
If your water sample is likely to contain more Nitrate, dilute the sample to
bring it into the above mentioned measurement range. You can do so, by
(e.g.) diluting 5 ml sample water plus 5 ml deionized water, measure as
usual, multiply result x 2.
Name on device: 34-Nitrate-pow
(34)
Nitrate
Liquid
+Powder
0.0 - 11.0 mg/l (N)
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.