PrimeLab 1.0 MULTITEST, Руководство пользователя

Страница: 166 / 353

133 133
0 - 10 mg/l (C H NOS)
3 3
1) Fill 10ml of the sample water into a clean 24mm cuvette.
2) Replace the screw lid on the cuvette and insert it into the PrimeLab
sampling chamber. Align the arrow on the front of the cuvette. Press
ZERO.
3) Remove the cuvette from the chamber and unscrew the lid.
4) Add 4 drops "PL Isothiazolinone 1" to your sample.
5) Close the lid. Shake the cell gently to mix the liquid.
6) Add 15 drops "PL Isothiazolinone 2" to your sample.
7) Close the lid. Shake the cell gently to mix the liquid.
8)Place the cell into the device. Again, please use caution to the arrow on
the cell. Than press TEST.
9) Add 17 drops "PL Isothiazolinone 3" to your sample.
10) Close the lid. Shake the cell gently to mix the liquid.
11) Place the cell into the device. Again, please use caution to the arrow
on the cell. Than press TEST.
12) Add 15 drops "PL Isothiazolinone 4" to your sample.
13) Close the lid. Shake the cell gently to mix the liquid.
(88)
Isothiazolinone
4
4
Liquid
10 ml
24 mm
PL Isothiazolinone 1
(PL30Isoz1)
PL Isothiazolinone 2
(PL65Isoz2)
PL Isothiazolinone 3
(PL65Isoz3)
PL Isothiazolinone 4
(PL65Isoz4)
PL Isothiazolinone 5
(PL30Isoz5)
The individual steps of the measurement procedure are shown on the display.
Use button 3 (arrow down) to scroll through the steps.
Use button 4 to skip the notes.
!
Measurement procedure:
The steps up to the selection of the parameter value to be determined are the same for all
procedures and described on page "TEST-5".
Please observe the important notes for
accurate measurements on pages "TEST-8" and "TEST-9".
One-Time-Zero:
Measure new ZERO
Use last ZERO
For the sake of precision select "Use last ZERO" only
if the stored ZERO value is used with the
same cuvette and the same water sample for the test!
!
If after switching on the device you have already performed the
ZERO (baseline) adjustment for the same type, the following
message is displayed:
-> Measure new ZERO = continue with step 2)
-> Use last ZERO = continue with step 4)
1 2 3 4
Name on device: 88-Isothiazol-liq
Continued...
4