Power Electronics SD 300 Series, Руководство по началу работы

Страница: 213 / 354

POWER ELECTRONICS SD300
DESCRIPTION OF PROGRAMMING PARAMETERS
211
Screen Description
Default
value
Range Function
Set on
RUN
US.11
Output link
address for
PLC function
1
0
0 to
65535
Use registers US.11-28 to set the
parameters to connect the 18 function
blocks. If the input value is 0, an output value
cannot be used.
To use the output value in step 1 for the
frequency reference (Cmd Frequency),
enter the communication address (0x1101)
of the Cmd frequency as the Link UserOut1
parameter.
NO
US.12
Output link
address for
PLC function
2
0 NO
…
US.27
Output link
addr. PLC
function 17
0
0 to
65535
See US.11.
NO
US.28
Output link
addr. PLC
function 18
0 NO
US.31
PLC input
value 1
0
-9999 to
9999
Use registers US.31-60 to set 30 void
parameters. Use when constant (Const)
parameter input is needed in the user
function block.
NO
US.32
PLC input
value 2
0 NO
…
US.60
PLC input
value 30
0
-9999 to
9999
See US.31. NO
US.80
Analogue
input V1 value 0.000 0 to
12.000%
Allows setting the analog input V1 voltage
value.
NO
US.81
Analogue
input I2 value +0.000
-12.000
to
12.000%
Allows setting the analog input I2 voltage or
current values.
NO
US.82
Digital inputs
value
0 0 to 127 Allows setting the digital inputs voltage
value.
NO
US.85
Analogue
output value
0
0.000 to
10.000%
Allows setting the analog output AO voltage
or current values.
NO
US.88
Digital output
value
0 0 to 3
Allows setting the digital output Q1 voltage
value.
NO