Power Electronics SD 300 Series, Руководство по началу работы

Страница: 106 / 354

SD300 POWER ELECTRONICS
104
DESCRIPTION OF PROGRAMMING PARAMETERS
14. DESCRIPTION OF
PROGRAMMING
PARAMETERS
The different parameters of the SD300 are organized in groups and are
described within this section.
Use the left and right arrow keys to jump from a parameter group to
another. Use the up and down keys to navigate between the parameters
of the selected group.
Please refer to section
“USE OF THE DISPLAY ”,
for instructions on how to
modify parameter values.
Group 0: Operation
This group is only available in the integrated display. It allows performing a
basic set up of the drive with its main parameters.
Screen Description
Default
value
Modbus Address
Function
DEC HEX
0.00 [1] Target frequency 0.00Hz 47936 0h1F00 Set the motor speed. See group
Drive(dr), parameter 0.00.
ACC
[1]
Acceleration time 20.0s 47937 0h1F01 See group Drive (dr), parameter
ACC.
dEC
[1]
Deceleration time 30.0s 47938 0h1F02 See group Drive (dr), parameter
dEC.
drv [1] Command source
1 =
Remote
47939 0h1F03 See group Drive (dr), parameter
drv.
Frq [1]
Frequency reference
source
0 = Local 47940 0h1F04 See group Drive (dr),
parameter Frq.
St1 [1]
Multi-step speed
frequency 1
10.00Hz 47941 0h1F05 See group Basic Functions (bA),
parameter St1.
St2 [1]
Multi-step speed
frequency 2
20.00Hz 47942 0h1F06
See group Basic Functions (bA),
parameter St2.
[1] Displayed when an LCD keypad is in use.
14