Power Electronics SD 300 Series, Руководство по началу работы

Страница: 129 / 354

POWER ELECTRONICS SD300
DESCRIPTION OF PROGRAMMING PARAMETERS
127
Screen Description Default
value
Range Function
Set
on
RUN
bA.78
[6]
Acceleration
ramp 6
20.0s
Note : comes from the previous page
The setting is carried out by assigning a speed
value for each parameter of this group:
-
- bA.70 to bA.82: for acceleration times.
- - bA.71 to bA.83: for deceleration times.
Once multi-function terminals have been
configured (In.65-71) as Speed-L/M/H (options
11, 12 and 49), acceleration and deceleration
commands will control the drive operation
based on the setting of bA.70-83.
For example, with the following options the
drive will operate as shown in the following
Figure Ramp operation example.
- In.65 ED1 = ′Speed - L′
- In.65 ED2 = ′Speed - M′
Accel / decel
time
DI1 DI2
0
1
✓
2 ✓
3 ✓ ✓
YES
bA.79
[6]
Deceleration
ramp 6
30.0s YES
bA.80
[6]
Acceleration
ramp 7
20.0s YES
bA.81
[6]
Deceleration
ramp 7
30.0s YES
bA.82
[6]
Acceleration
ramp 8
20.0s YES
bA.83
[6]
Deceleration
ramp 8
30.0s YES
Ramp operation example