Power Electronics SD 300 Series, Руководство по началу работы

Страница: 161 / 354

POWER ELECTRONICS SD300
DESCRIPTION OF PROGRAMMING PARAMETERS
159
Screen Description Default
value
Range Function
Set
on
RUN
In.11
V1 maximum
reference
10.00% 0.00 to
100.00%
Set the speed reference corresponding to the
analog input 1 minimum range. It corresponds
to the minimum voltage level set in In.10. It is
configured to introduce the speed reference
through the V1 analog input. The value is a
percentage of In.1.
YES
In.12
[24]
V1 minimum
negative
voltage
10.00V -10.00 to
0.00V
Define the negative minimum voltage for the
analog input 1, according to the connected
sensor characteristics.
YES
In.13
[24]
V1 minimum
negative
reference
-10.00%
-100.00
to 0.00%
Set the speed reference corresponding to the
analog input 1 minimum negative range. Is
corresponds to the minimum voltage level set
in In.12. It is configured to introduce the speed
reference through the analog input. The value
is a percentage of the frequency adjusted in
parameter In.1.
YES
In.14
[24]
V1 maximum
negative
voltage
-10.00V -10.00 to
0.00V
Define the maximum negative voltage for the
analog input 1 according to the connected
sensor characteristics.
YES
In.15
[24]
V1 maximum
negative
reference
10.00%
-100.00
to 0.00%
Set the speed reference corresponding to the
analog input 1 maximum negative range. It
corresponds to the maximum voltage level set
in In.13. It is configured to introduce the speed
reference through an analog input. The value
is a percentage of In.1.
YES
In.16 V1 Inverting N
N
S
Inverts the direction of rotation. Set this
parameter to 1 (NO) if you need the motor to
run in the opposite direction from the current
rotation.
YES
[24] Displayed if ln.6 is configured as bipolar (

10V).