Power Electronics SD 300 Series, Руководство по началу работы

Страница: 339 / 354

POWER ELECTRONICS SD300
CONFIGURATION REGISTER
337
PARAMETER
DEFAULT
VALUE
SETTING 1 SETTING 2
Pr.22
Overload trip time
60.0s ___________________ ___________________
Pr.25
Enable underload
YES ___________________ ___________________
Pr.26
Underload warning delay
10.0s ___________________ ___________________
Pr.27
Underload fault mode
None ___________________ ___________________
Pr.28
Underload fault delay
30.0 ___________________ ___________________
Pr.29
Underload minimum level
+30% ___________________ ___________________
Pr.30
Underload maximum level
+30% ___________________ ___________________
Pr.31
Action in case no motor is
detected
None ___________________ ___________________
Pr.32
No motor fault level
+5% ___________________ ___________________
Pr.33
No motor fault delay
3.0s ___________________ ___________________
Pr.40
Action in case of thermo-
electronic fault None ___________________ ___________________
Pr.41
Motor cooling mode at zero
speed
SELF ___________________ ___________________
Pr.42
Overcurrent level during 1 min
150% ___________________ ___________________
Pr.43
Continuous overcurrent level
+120% ___________________ ___________________
Pr.45
Free run trip mode
FreeRun ___________________ ___________________
Pr.50
Stall prevention
00 ___________________ ___________________
Pr.51
Speed for stall protection 1
60Hz ___________________ ___________________
Pr.52
Level for stall protection 1
180% ___________________ ___________________
Pr.53
Speed for stall protection 2
60Hz ___________________ ___________________