Power Electronics SD 300 Series, Руководство по началу работы

Страница: 337 / 354

POWER ELECTRONICS SD300
CONFIGURATION REGISTER
335
PARAMETER
DEFAULT
VALUE
SETTING 1 SETTING 2
AP.21
Select feedback signal source
V1 ___________________ ___________________
AP.22
PID controller proportional
gain
+50.00% ___________________ ___________________
AP.23
PID controller integration time
10.0ms ___________________ ___________________
AP.24
PID controller differential time
0ms ___________________ ___________________
AP.25
PID output fine adjustment
+0.0% ___________________ ___________________
AP.26
Proportional gain scale
100.0% ___________________ ___________________
AP.27
PID Filter
0ms ___________________ ___________________
AP.28
PID mode
Process ___________________ ___________________
AP.29
Upper limit PID output
+60.00Hz ___________________ ___________________
AP.30
Lower limit PID output
-60.00Hz ___________________ ___________________
AP.31
Invert PID
N ___________________ ___________________
AP.32
PID output scale
+100.00% ___________________ ___________________
AP.34
PrePID reference
0.00Hz ___________________ ___________________
AP.35
PrePID end reference
0.0% ___________________ ___________________
AP.36
PrePID delay
600s ___________________ ___________________
AP.37
Sleep mode activation delay
60.0s ___________________ ___________________
AP.38
Sleep mode activation speed
0.00Hz ___________________ ___________________
AP.39
Awakening level
+35% ___________________ ___________________
AP.40
PID WakeUp mode
Below ___________________ ___________________
AP.42
PID unit
% ___________________ ___________________