SPCN310
GSM Module incl. Antenna
Modem GSM incluyendo antena
Modul GSM vcetne anteny
Modut telefoniczny GSM
STEP: A6V10209207, Edition: 17.09.2008
English
CE
,&. Before starting to install and work with this device,
please read the Safety Instructions.
Installing the SPCN310
The SPCN310 provides the SPC controller with a GSM
interface allowing the user to send and receive text
messages via the mobile network. For a complete
description on the GSM features please consult the SPC
Configuration Manual.
The SPCN310 must have a SIM card installed in the unit
to operate (see below for details on installing the SIM
card).
I
See Fia:
I
1
I
SPCN310
I
I
1
I
SPCN310 on the SPC Controller
I
Before installing the GSM module onto the SPC
controller ensure that a functioning SIM card is installed
on the module.
To install a SIM card onto the GSM module unlock flap
with an upward motion, rotate the flap on the SIM card
holder to the 'up' position and slide the SIM card down
into the slot. Rotate the flap back to its original position,
press and click into place with a downward motion.
Please make a note of the unlock code for your SIM card
as this will be required when enabling the SIM card on
the SPC.
I
See
Fia:
I
2
I
Insert SIM Card
I
I
1
I
SIM Card
I
I
2
I
SIM Card Holder
I
1
1
oao o□□□
� 0
2
0
I
�
0
D
=
o
o 11111B111111111
aaciaa
aaaaa
o��
□
□
D
3
To install the SPCN310 (with SIM card):
► Ensure the AC Mains power and battery backup
connections are removed.
'
-
-----------
--
:
:
'
'
'
'
'
'
4
► Insert the mounting pillars (included with the modem)
&.
WARNING
into the hole positions at the top on either the primary
slot (left) or back-up slot (right) on the controller.
► Align the 16-pin female socket over the 16-pin male
connector, ensuring that the holes on the SPCN310
0
0
Installation Instruction
When replacing or installing modules
on the SPC system, always ensure
that the mains supply and the battery
are disconnected. Ensure that all
anti-static precautions are adhered to
when handling connectors, wires,
terminals and PCBs.
are aligned with the top of the mounting pillars.
Please make a note of the unlock code for your SIM card
► Firmly but gently press down to secure the module.
as this will be required when enabling the SIM card on the
► Power up the SPC controller.
SPC.
I See
Fia:
I 3 I
Primarv and Back-Uo Slot
I
Configuring the SPCN310
I
1
I
Primarv Slot
I
For configuration instruction please refer to SPC
Configuration Manual or SPC Pro Configuration Manual.
I
2
I
Back-Up Slot
I
Technical Data
Communication
Analogue alarm protocols (e.g. SIA,
LED Functionality
protocol
Contact ID), PPP dial up, SMS
There are 2 LED's on the top left of the modem module.
Interfaces
1 x 16-Pin socket to controller
The top LED (D1) stays on during the configuration period
interface,
of the modem. When the modem has been configured
1 x
SMA
connector for aerial
this LED flashes regularly (once every second approx.) to Status LEDs
2
indicate that the modem is functioning normally.
Network
GSM (dual band 90011800 MHz)
The bottom LED (D2) flashes when the modem is
connection
communicating with the SPCN310 mast. This occurs
Current
Min. 50 mA at 12 V DC
during registration and whenever data is being
consumotion
Max. 60 mA at 12 V DC
exchanged.
Operating
s -
40
·c
An antenna (supplied with the SPCN310) needs to be
temperature
attached to the SMA connector located at the end of the
Relative
Max. 90 % (no condensation)
humiditv
connector lead. (If an additional SMA connector is
MountinQ
Plui:i on module for SPC controller
mounted on the top of the module, do not use it to
Standards
Designed to meet
connect the antenna.) The antenna can be mounted on
the top of the cabinet using one of the knock-out holes
EN50131-1 :2006 (Grade 3),
provided. Ensure that the antenna is unobstructed.
TS50131-3:2003 (Grade 3)
I
See Fig_:
I
4
I
LEDs on the toe left
I
