Trouble locating and clearing procedures (continued) 1-377
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Scheduling ISUP trunk audits
(continued)
Scheduling ISUP trunk audits
At the MAP terminal
1
To access table OFCENG, type
>TABLE OFCENG
and press Enter.
Example of a MAP response:
Note: Access to table OFCENG is restricted. If access is denied, contact
your next level of support.
2
To position on office parameter CIRCUIT_QUERY_AUDIT_START_TIME,
type
>POSITION CIRCUIT_QUERY_AUDIT_START_TIME
and press Enter.
Example of a MAP response:
3
To display the tuple with headers, type
>LIST
and press Enter.
Example of a MAP response:
Note: In the MAP example, 2 0 is the current ISUP trunk audit start time
in hours (0 to 23) and minutes (0 to 59).
4
Decide if you want to change the ISUP trunk audit start time.
CAUTION
Possible loss of service
Ensure table TRKSGRP is datafilled to include the ISUP
trunks on which you want to perform the audit before you run
the ISUP audit. For more information on table TRKSGRP,
refer to the data schema section of the Translations Guide.
If the ISUP trunk audit start time
Do
does not require change
step 8
TABLE: OFCENG
CIRCUIT_QUERY_AUDIT_START_TIME
2 0
PARMNAME
PARMVAL
CIRCUIT_QUERY_AUDIT_START_TIME
2 0