1-490 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
TOPS MP Operator complaint (standalone)
Clearing position failure - cannot RTS position
(continued)
At the affected MP position
9
To turn the MP position on and off, move the power switch on the MP VDU.
Move the power switch on the MP VDU to the off (0) position and then to the
on (|) position. Refer to the figure below.
10
Check the four icon indicators on the initializing screen of the MP VDU.
11
Check the keyboard indicator.
12
Make sure the keyboard cable plugs in the base controller.
0
|
Power switch
AC connector
Rear view MP position
Base
controller
If initializing screen indicators
Do
have checkmarks ( )
step 26
are not correct
step 11
If the keyboard indicator is
Do
a checkmark ( )
step 14
not a checkmark
step 12