Trouble locating and clearing procedures (continued) 1-341
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Running a C7BERT
(continued)
where
link_no
is the number of the link (0 to 15)
100
Determine the synchronization state of the link.
Note: The synchronization state appears under the Sync Stat header of
the MAP display.
101
Wait 8 minutes, and continue with this procedure.
102
Determine the synchronization state of the link.
103
Determine from office records the far-end office that connects to the linkset
posted in step 4.
104
Contact the far-end office. Tell the person at that location that
•
you are going to busy and deactivate the link in order to realign it, and that
•
the person and you must activate the link from both ends after you busied
and deactivated the link
Go to step 100.
105
To deactivate the link, type
>DEACT link_no FORCE
and press Enter.
where
link_no
is the number of the link you activated in step 99
If the ACT command
Do
passed
step 100
failed
step 109
is other than listed here
step 109
If the synchronization state
Do
is Alnd
step 107
is other than listed here
step 101
If the synchronization state is
not Alnd, and you
Do
did not ask the far-end office to
activate the link
step 103
already asked the far-end office
to activate the link
step 105