1-240 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Replacing an NTFX39 bulkhead splitter unit
(continued)
4
Determine if any terminal controller ports are on the shelf.
5
Note the CONS ID and status for each port.
6
Inform office personnel of the removal from service of the CONS IDs for the
controller card. Wait until all persons cease activity for these CONS IDs.
7
To post the port for the replaced CONS, type
>PORT port_no
and press Enter.
where
port_no
is the port identification number
Example of a IOM MAP display:
IOD
IOC 0 1 2 3
STAT . . . S
DIRP: SMDR B XFER: . SLM : . NPO: . NX25: .
MLP : . DPPP: . DPPU: . SCAI :
IOC PORT 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
(IOM) STAT . . . – . . – – – . – – – – – – – –
0
TYPE C C C C M
M
S S
O O O O T
P
C C
N N N N D
C
S S
If terminal controller ports
Do
are on the shelf
step 5
are not on the shelf
step10
If
Do
ports are ManBsy
step 9
one or more ports are Offl
step 55
one or more ports are . (dot) in
service
step 6
ports are in any other state that is
out of service
step 8
Port 0 Status
0
Cons Id
MAP
ConType
CYB
