Trouble locating and clearing procedures (continued) 1-335
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Running a C7BERT
(continued)
79
To start the C7BERT, type
>START link_no
and press Enter.
where
link_no
is the number of the link you want to test (0 to 15)
80
To display the test results of the C7BERT, type
>QUERY link_no
and press Enter.
where
link_no
is the number of the tested link (0 to 15)
Example of a MAP response:
81
Determine if any transmitted Tx frames exist.
Note: The number of frames transmitted appears to the right of the Tx
Frames header of the MAP display. In the example in step 31, the number
of frames transmitted is 19 016 .
If the response
Do
is Link n: C7BERT started
step 80
is Link n:Failed - Link state is
invalid for C7BERTLink must
be ManB and DAct (or LFS)
step 6
is other than listed here
step 109
If the response
Do
is a display of C7BERT statistics
step 81
is other than listed here
step 109
If Transmitted Tx Frames
Do
are present
step 82
query 1
Link 1: C7BERT query
Run Time : 662 Err Free Secs: 662
Tx Frames : 19016 Rx Sync Errs : 0
Rx Frames : 19019 Rx Bad Frames: 0
Rx Bit Errors: 0 Rx Bits : 38931896
Bit Err Rate : 0 x 10–15
