1-364 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT for high-speed links
(continued)
and press the Enter key.
where
link_no
is the number of the link (0 to 15)
70
Determine the synchronization state of the link.
Note: The synchronization state appears under the Sync Stat header of
the MAP display.
71
Wait 8 min, then continue the procedure.
72
Determine the synchronization state of the link.
73
Use office records to determine which far-end office connects to the linkset
posted in step 4.
74
Contact the far-end office. Tell the personnel there that you will reactivate the
link.
75
Tell personnel at the far-end office to activate the link.
76
To activate the link from your end, type
>ACT link_no
and press the Enter key.
where
link_no
is the number of the link you activated in step 69
If the ACT command
Do
passed
step 70
failed
step 78
If the synchronization state is
Do
Sync
step 77
anything else
step 71
If the synchronization state is
Do
SysB
, and you have not asked
the far-end office to activate the
link
step 74
SysB
, and you have asked the
far-end office to activate the link
step 73
If the ACT command
Do
passed
step 77
