1-322 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT
(continued)
32
Determine the if any transmitted Tx frames exist.
Note: The number of frames transmitted appears to the right of the Tx
Frames header of the MAP display. In the example in step 31, the number
of frames transmitted is 19 016 .
33
The test runs correctly. The C7BERT generates test results when you request
periodic reports, stop the test manually, or stop the test automatically at a
preset time. Decide the action you want to take.
Note: If a switch restart occurs when a C7BERT runs on a link, the test
stops automatically. If the LIU7 for the link fails, the test also stops
automatically.
34
To display C7BERT results, type
>QUERY link_no
and press Enter.
where
link_no
is the number of the tested link. (0 to 15)
Example of a MAP response:
If Transmitted Tx Frames
Do
are present
step 33
are not present
step 66
If
Do
you want to request periodic re-
ports
step 40
you want to stop the test manual-
ly
step 44
you want to stop the test auto-
matically at a preset time
step 50
the
link
connects
to
a
NT9X78DA/DB card and you
want to inject bit errors
step 34
