1-326 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT
(continued)
45
Give the results to the persons responsible for the next level of support.
46
Remove the manual loopback across network elements.
47
Your next step depends on the instructions received from your next level of
support.
48
To deactivate a local loopback, type
>PMLOOP LOCOFF link_no
and press Enter.
where
link_no
is the number of the link you tested in step 18
If
Do
the link stops on an NT9X77AA,
NT9X78BA/CA/DA/DB, or NTEX26AA card, and
you just ran a peripheral module (PM) local or re-
mote loopback. If instructions required you to return
the link to service
step 48
or 49
the link stops on an NT9X77AA,
NT9X78BA/CA/DA/DB, or NTEX26AA card, and
you just ran a PM local or remote loopback. If in-
structions required you to perform more tests
step 48
or 49
the link does not stop on an NT9X77AA,
NT9X78BA/CA/DA/DB, or NTEX26AA card
step 46
other than listed here
step 110
If
Do
instructions required you to re-
turn the link to service
step 55
instructions required you to per-
form more tests
step 24
other than listed here
step 110
If the response
Do
is
pmloop off 1
Link
1: Loopback Lo-
cal off completed
step 55
is other than listed here
step 66