CD MICRO WITH FM RADIO AND BLUETOOTH
Model : HX- 1081BT
(Bluetooth pairing code: HX-1081BT HANNLOMAX)
INSTRUCTION MANUAL
Note:
Please read and follow these instructions before using your unit.
1.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
2.
Do not use this apparatus near water.
3.
Clean only with dry cloth.
4.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
8.
Only use attachments/accessories specified by the manufacturer.
9.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
12. Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Alternate Warnings – This product is equipped with a three-wire ground-type plug, a plug having a third (grounding) pin. This plug will only
into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
14. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have been adhered to.
15. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
16.
回
: CLASS II apparatus with double insulation, and no protective earth provided.
17. Caution Marking and rating plate was located at bottom enclosure of the apparatus.
18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
19. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
apparatus.
20. The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed OR should be easily accessed
during intended use. To be completely disconnect the power input, the mains plug or apparatus shall be disconnected from the mains.
21. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
22. Excessive sound pressure from earphones and headphone can cause hearing loss.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
–
Consult the dealer or an experienced radio/TV technician for help.
-1-
LOCATION OF CONTROLS
1
Speaker
11
SKIP−/TU− button
2
VOLUME knob
12
CD door OPEN button
3
LCD display
13
CD compartment
4
ON/OFF button
14
Speaker jack R
5
SOURCE button
15
Speaker jack L
6
MODE button
16
Aux-in jack
7
PROG/MEM button
17
AC power cord
8
PLAY/PAUSE button
18
FM wire antenna
9
STOP/M+ button
19
Remote Sensor
10
SKIP+/TU+ button
SPECIFICATIONS
Power supply:
AC 120V ~ 60Hz
Frequency range: FM 87.5 – 108 MHz AM 520 – 1720 KHz
CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the input of for the speakers. Two Speakers are identical.
Warning:
Connect the loudspeakers before powering the unit:
The unit may not work properly or get damaged if you use speakers different than the ones supplied
with the unit.
AC OPERATION
Connect the power cable plug to the wall outlet.
ATTENTION
1.
Do not plug or unplug the power cable while you have wet hands;
2.
When planning not to use this unit for a long time, disconnect the power cable from the wall outlet;
3.
When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock
risks caused by damaged cable.
TURN ON AND OFF THE UNIT
Press the
ON/OFF
button to turn the unit ON or OFF.
RADIO OPERATION
1.
Press
SOURCE
button to select
AM
or
FM
radio mode.
2.
Press the
SKIP+/TU+
button or
SKIP−/TU−
button step by step to tune to the desired radio stations.
3.
Press and hold the
SKIP+/TU+
button or
SKIP−/TU−
button to search the next radio station in the
direction of the search. The search operation simply finds stations with strong signals, Stations with
weak signal can only tuned in step by step
4.
Use the
VOLUME
knob to adjust the volume to the desired listening level.
-2-
