![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524097.webp)
4-22 Using the ECU and SCSI Utilities
5.
Select the configuration file you need to copy. You can
only copy one file at a time. Press
Enter
.
You are prompted to remove the configuration diskette.
6.
Remove the diskette and replace it with the ECU
diskette.
After replacing the diskette, the CFG file is copied onto
the ECU diskette.
7.
Repeat Steps 5 and 6 to copy all the configuration files
you need onto the ECU diskette.
Exit
Select this option to exit the ECU utility.
If you are setting up the system for the first time and
you have a SCSI device (such as a SCSI hard disk and
CD-ROM reader), see “SCSI Select Utility” later in this
chapter.
PCI Devices and Plug and Play ISA Boards
Whenever you install a PCI device or Plug and Play ISA
board in the system, run the ECU and select “Configure
Computer or Peripheral Devices.”
This configuration procedure automatically loads configu-
ration information and adds the PCI device or Plug and Play
board to the configuration. Select “Step 3: View or Edit
Details” to check system parameters and “Step 4: Examine
Required Switches” to print out system configuration
information.
Be sure to select Step 5 in the Configure Computer or
Peripheral Devices menu and save your configuration.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...