Using the ECU and SCSI Utilities 4-23
ISA Boards without CFG Files
If a CFG file did not ship with your ISA board, check to see
if one exists for the board on the ECU diskette or on a CFG
File Library diskette. If you still cannot locate a CFG file
for the board, use one of the following procedures:
■
configure your system for the ISA board with the
Generic ISA CFG File provided by the ECU (see the
next section, “Using the Generic ISA CFG File”).
■
create a CFG file for the ISA board (see “Using the
Create CFG File Facility” later in this section). Use this
procedure when the Generic ISA CFG File is not
available.
Using the Generic ISA CFG File
The ECU provides one Generic ISA CFG file that you can
use with an ISA board that does not have a corresponding
file. However, if you have a multifunction ISA board, you
may have to manually create a configuration file (see
“Using the Create CFG File Facility,” next).
NOTE: The ECU provides only one Generic ISA
CFG file. If you already used the Generic ISA CFG
file, see “Using the Create CFG File Facility.”
Before you use the Generic ISA CFG file, determine if a
CFG file exists for the ISA board. If you cannot locate a
CFG file, use the following procedure to configure your
system for the ISA board.
NOTE: Do not install the ISA board in your system
until you have completed the following procedure.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...