![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524177.webp)
Adding Options 7-51
7.
Connect the device cables as follows:
■
Connect an unused connector on the power cable and
on the SCSI or IDE signal cable into the device (see
the following figure).
Use care to prevent bending drive connector pins.
Align the SCSI or IDE connectors as shown in the
figure.
Connecting the internal device cables
SCSI or IDE
Cable
Red Edge
Power
Cable
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...