![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524110.webp)
Using the ECU and SCSI Utilities 4-35
Before opening the menu, the utility scans your system for
installed SCSI devices as indicated by a Scanning message
on your screen.
On completion of the scan, a screen similar to the following
displays.
NOTE: The screen shown is typical of your system.
The actual items on the menu depend upon the
hardware installed in your system.
AIC-7850 at Bus Device 00:03h
Select SCSI Disk and Press <Enter>
SCSI ID #0 SEAGATE ST3255ON
SCSI ID #1 No device
SCSI ID #2 No device
SCSI ID #3 No device
SCSI ID #4 CD-ROM Drive
SCSI ID #5 No device
SCSI ID #6 No device
SCSI ID #7 AIC-7850
Arrow Keys to Move Cursor, <Enter> to Select Option, <ESC> to Exit (*=default)
Use the arrow keys to move the cursor to the parameter,
press
Enter
to display the parameter’s submenu, make your
changes, and press
Esc
to exit.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...