![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524103.webp)
4-28 Using the ECU and SCSI Utilities
7.
Select “Create CFG file.” The “Create a Board CFG
File” screen appears.
8.
Enter the board description and manufacturer. Press
Enter
. The “New Board Setup” screen appears.
9.
Review the manufacturer’s documentation and select the
resources used by the board’s current configuration as
follows:
■
If your board requires interrupts, choose “Select
Interrupts.” Select the interrupts used by the board’s
current configuration. You must limit your selections
to seven interrupts.
Press
F10
when done. The “New Board Setup”
screen reappears.
NOTE: Press F7
if you need to check the current
allocation of your system’s resources.
■
If the board requires DMA channels, choose “Select
DMA Channels.” Select the DMA channels used by
the board’s current configuration. You must limit
your selections to four DMA channels.
Press
F10
when done. The “New Board Setup”
screen reappears.
■
If the board requires a port address, choose “Select
Port Addresses.” The “Select Port Addresses” screen
appears. Press
Insert
to enter a port address or
Delete
to remove a port address. When you press
Insert
, the “Add New Port” screen appears.
Enter the starting and ending addresses in hexadeci-
mal format. Press
Enter
when you are done. The
“New Board Setup” screen appears.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...