![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524158.webp)
Adding Options 7-33
Each SCSI device must have a unique ID. ID 7 is always
reserved for the integrated SCSI controller. Switches or
jumpers on the SCSI device select a SCSI ID ranging from
0 to 6.
Cables
The standard internal cables shipped with your system for
installing optional storage devices include:
■
a diskette drive signal cable
■
a primary PCI/IDE interface cable
■
a secondary PCI/IDE interface cable
■
a SCSI-2 interface cable
■
system power cables.
Your system ships with the diskette drive signal cable con-
nected to the system board and to the standard 3 1/2-inch
diskette drive. The cable has an additional connector for an
optional diskette drive.
For systems shipped with an IDE hard disk, the primary
PCI/IDE interface cable comes connected to the primary
PCI/IDE connector on the system board and to the standard
IDE hard disk and IDE CD-ROM. The internal SCSI inter-
face cable comes connected to the SCSI connector on the
system board. The SCSI cable has connectors for up to five
optional SCSI devices.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...