![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524155.webp)
7-30 Adding Options
Locating device slots
Device Preparation
Before you install a storage device in the system, follow any
pre-installation instructions that come with the device. You
should also check Chapter 3 and Chapter 4 in this document
for information about setting system parameters for the
device being installed.
For example, check the following items for these devices:
■
Diskette drive — remove any termination on the optional
diskette drive. See the drive documentation.
■
SCSI-2 device — check the documentation that comes
with the device and the following sections for informa-
tion on setting interface termination, termination power,
motor start at power-on, SCSI identification (ID) num-
ber, and any other device functions.
5 1/4 - Inch
Accessible Slots
5 1/4 - Inch
Accessible Slot
(contains
3 1/2 - Inch
Accessible Slot
(contains 1.44-MB
diskette drive)
CD-ROM reader)
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...