manualshive.com logo in svg

NEC IMAGE P100E - SERVICE, Руководство пользователя, Страница: 139 / 235

Поделиться
Скачать
NEC IMAGE P100E - SERVICE Скачать руководство пользователя страница 139

    

 7-14   Adding Options

SIMM UPGRADE KITS

 Systems in the U.S. and Canada support the following
36-bit SIMM stick configurations:

■  

4-MB stick (1-MB by 36-bit)

■  

8-MB stick (2-MB by 36-bit)

■  

16-MB stick (4-MB by 36-bit)

■  

32-MB stick (8-MB by 36-bit).

 CAUTION:   To avoid corrosion between different
metals, only use tin-plated SIMM sticks.

 The SIMM sticks must have a speed of 60 or 70
nanoseconds (ns).

 SIMM sticks installed in the sockets on the SIMM memory
board increase the total system high-speed memory. The
system supports up to 256 MB of high-speed memory.

 Use the following procedures to install a SIMM stick.

 CAUTION:   Static discharge can damage SIMMs.
Heed all cautions in the following sections.

Cautions

 Always remove a SIMM from its shipping material care-
fully. Static discharge can damage SIMM components.
Take the following precautions when handling SIMMs:

■  

Avoid carpets in cool, dry areas.

■  

Do not remove the SIMM from its anti-static packaging
until you are ready to install it.

Содержание IMAGE P100E - SERVICE












































































































































































































































Отзывы:

Нет отзывов