![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524095.webp)
4-20 Using the ECU and SCSI Utilities
NOTE: To check the current settings of a board,
you must physically verify the settings. For exam-
ple, you must power off the system and remove the
system cover to verify the current system board
System Configuration Switch settings.
If you have a printer set up, you can print the settings of a
particular board or option. You can also save the settings to
a file that you can use to print on another computer that is
connected to a printer. Press
F7
for a list of print options.
Step 5: Save and Exit
Select Step 5 to save your configuration and reboot your
system.
Set Date or Time
Set the date and time if you are setting up the system for the
first time or you need to correct the settings. The settings
remain in memory even after the system is powered off.
To set the date and time, choose “Select Date or Time”
from the Main Menu and select the date and time menu
options.
NOTE: When setting the date or time, enter any
preceding zeroes. For example, to enter 8:20 a.m.
and March 7, 1995, type 08:20:00 and 03-07-1995.
To cancel the selection without saving the date and time,
press
Esc
.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...