4-34 Using the ECU and SCSI Utilities
Advanced Configuration Options
PARAMETERS
OPTIONS
DESCRIPTION
Reset SCSI Bus
at IC Initialization
Enabled (default)
Disabled
Enables or disables the Reset SCSI
Bus at Initialization.
Note: The following options have no effect if the BIOS is disabled.
Host Adapter
BIOS
Enabled (default)
Disabled
Enables or disables the host
adapter BIOS
Support
Removable
Disks under
BIOS as Fixed
Disks
Boot Only (default)
All Disks Disabled
Allows use of removable hard disks
as fixed hard disks under BIOS
control
Extended BIOS
Translations for
Drives Greater
than 1 GByte
Enabled (default)
Disabled
Enables or disables extended BIOS
for 1 GByte or larger drives.
BIOS Support For
More Than 2
Drives (MS-DOS
5.0 and above)
Enabled
Disabled
Enables or disables BIOS support
for more than two drives.
SCSI Disk Utilities
Use the SCSI Disk Utilities option to check what SCSI
devices are currently installed in your system and to set the
SCSI ID number on any optional SCSI devices that you
may install.
At the SCSI Select utility opening screen, position the
cursor to SCSI Disk Utilities and press Enter to display the
SCSI Disk Utilities menu.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...