![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524043.webp)
Using Your System 2-19
Or turn the system power off, wait at least five seconds,
and then turn the power on.
A hardware reset performs a cold boot. It checks the
hardware and reloads the operating system.
Automatic Reset
An automatic reset performs a cold boot. The system
automatically resets itself when you exit from the Setup
utility.
Backup
Backup procedures are important for the efficient and
effective use of your computer. Protect your program and
data files with regular backup procedures.
See your MS-DOS and Windows for Workgroups
documentation for information about backup procedures.
Make backup copies of your program and data files that are
on diskette and on the hard disk.
The standard practice for diskette backup is to copy each
diskette, store the original in a safe place, and use the copy
as your working diskette. You can use the MS-DOS
DISKCOPY command for making copies of your diskettes.
See your MS-DOS documentation for information about
using the command.
Powering Off
Use the following steps to shut down (power off) your
computer.
1.
Save your work. See the documentation that comes with
your application program.
2.
Exit the application program.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...