![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524085.webp)
4-10 Using the ECU and SCSI Utilities
Configure Computer or Peripheral Devices
Select the “Configure Computer or Peripheral Devices”
option under the following circumstances:
■
you are setting up the system for the first time
■
the “Invalid Configuration Information” message
appears at POST
If this message appears, run the Setup utility to correct
any configuration errors.
If you receive an “EISA Configuration NVRAM Bad -
Run Configuration Utility - F2 to Run Setup” message,
run the ECU utility, not the Setup utility.
■
you add, move, or remove an expansion board
■
you installed a PCI device
■
you want to change board functions or resources
■
you want to view switch and jumper settings for a
specific board
■
the RTC/battery module was replaced in the system and
you need to set the system parameters.
If you installed an EISA or ISA board and you select
“Configure Computer or Peripheral Devices,” the ECU
might display an “Automatic Add” screen with a request for
a configuration (CFG) file.
The ECU displays this screen if it needs a configuration
(CFG) file for the installed board. If the screen appears,
remove the ECU diskette and insert the diskette containing
the CFG file. Press
Enter
and follow the screen prompts to
automatically add the required CFG file.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...