![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524182.webp)
7-56 Adding Options
2.
Check that the system power is off.
3.
Connect the external SCSI cable to the SCSI-2 port at
the rear of the system and to the external SCSI device.
Connecting an external SCSI cable
4.
Connect your external SCSI devices to the external
SCSI cable.
NOTE: The last device connected to the external
SCSI cable must be terminated. See the documen-
tation that comes with the SCSI device for termina-
tion information.
5.
Turn system power on.
6.
Run the SCSI Select utility to change your configuration
(see Chapter 4).
External
SCSI-2
Cable
SCSI-2
Port
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...