Adding Options 7-23
6.
Replace any expansion boards that you may have re-
moved (see “Board Installation” earlier in this chapter).
7.
Check that all cables are out of the way of the system
cover, then replace the cover.
8.
Connect external peripherals and power cables.
NOTE: If you find a discrepancy in the amount of
memory that the Power-On Self-Test finds with the
amount of memory that you installed, check that
you installed the SIMM sticks correctly.
DUAL-PROCESSOR UPGRADE
A 320-pin ZIF socket on the system board makes it easy for
you to add a second processor to your system for dual-
processor capability.
Use the following procedures and the instructions included
with the upgrade option kit to install the upgrade in your
system.
CAUTION: Incorrect installation of the processor kit
can damage the processor, system board, or both.
Follow the instructions carefully.
1.
Remove the system unit cover (see “Removing and Re-
placing the System Unit Cover” earlier in this chapter).
Turn the system unit on its side for easier access to the
interior of the system.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...