![background image](http://html1.mh-extra.com/html/production-basics/rtw-3000/rtw-3000_assembly-manual_1609648001.webp)
RTW TABLE
RTW Table with optional accessories.
Production Basics, Inc. 30 Bridge St. Watertown, MA 02472 617.926.8100 Fax: 617.926.8010 www.pbasics.com
Item Numbers 3000-3115
PA R T S A N D H A R D W A R E
Q U A N T I T Y
Frame Legs (left and right specific)
2
Leg Adjusters
4
RTW Support Channel
2
Chrome Mounting Plate
4
Worksurface
1
Leveling Feet
4
End Caps
6
Wood Screws
12
Basic Bolts
16
Allen Wrench
1
Other Items Needed (not included)
Phillips head drill or screwdriver
Rubber mallet
Level
Tape Measure
Assembly Tips
Review entire instruction manual before proceeding.
Production Basics nameplate indicates front of frame.
Legs are adjustable in 2-inch increments between 30-36 inches high
to customize worksurface height.
Don't be a slave to gravity-recruit a co-worker to help you install and
correctly position components and accessories.
References to 'Left' and 'Right' are oriented as if you were facing the
front of the workstation.
Need help? Call Assembly Support at 800.318.2770.
RTW Support Channel
Right Frame Leg
(channel facing inward)
Mounting holes for Uprights
must be at back of Frame Leg.
1. Open the cartons and identify the left and right Frame Legs
and RTW Support Channels. Position Frame Legs so that
pre-drilled holes are at the back of the RTW Table. Frame
Legs have a horizontal open channel that faces inward.
2. Screw the levelling feet all the way into the leg adjusters.
3. Slide leg adjusters into bottom of Frame Legs. Determine
desired table height and secure position by inserting two (2)
Basic Bolts. Adjust leveling feet if necessary.
A S S E M B L Y M A N U A L
WORKSTATIONS
Basic Bolt
Chrome Mounting
Plate
Wood Screw